Sinolyn
2.5" RHD Bi-LED Projectors (Tri-Colour)
2.5" RHD Bi-LED Projectors (Tri-Colour)
Couldn't load pickup availability
Free Shipping
On all NZ orders
Installation Available
Get a fitting quote
Buy Now, Pay Later
Pay in 4 with Afterpay
Description
The Sinolyn 2.5" Tri-Colour Bi-LED Projector Lenses come with a right-hand drive (RHD) beam cut-off made for New Zealand roads, and give you three light colours in one projector: 3000K golden yellow for rain and fog, 4300K warm white, and 6000K crisp white, all switchable from your phone with the Bluetooth app. Each projector runs six Sinolyn LED chips on a solid metal base, with a solenoid-driven shield for low and high beam and a cooling fan with aluminium housing for stable output.
A threaded-shaft mount lets them fit H4, H7, 9005 and 9006 reflector headlights with little or no modification, and they can also replace existing 2.5" projectors (the mounting hole may need modifying). Run them on their own, add a plain chrome or black shroud, or choose from seven Sinolyn halo shrouds with white LED halos. Sold as a pair and backed by a 1-year warranty.
A versatile projector upgrade that adapts to the conditions and the look you're after.
Features & Benefits
RHD Beam Pattern for NZ Roads
Right-hand drive cut-off for driving on the left, so the low beam lights up the kerb side without dazzling oncoming traffic.
Three Colour Temperatures
Switch between 3000K, 4300K and 6000K, from golden yellow for rain and fog through to crisp white.
Bluetooth App Control
Adjust colour temperature and brightness from your phone, with weather-based presets and colour flash modes.
Bi-LED Low & High Beam
A solenoid-driven shield gives a sharp low-beam cut-off and switches to high beam in the same projector.
Six LED Chips
Six Sinolyn LED chips on a solid metal base for strong, even light with no dark spots.
Fan Cooling
Cooling fan and aluminium housing keep temperatures down for stable output and a long service life.
Digital Control Board
Manages voltage fluctuations and monitors fan speed to protect the LEDs.
Threaded-Shaft Mount
Fits H4, H7, 9005 and 9006 reflector headlights with little or no modification.
Halo Shroud Styles
Choose round, full round, BMW style, hex, spiral with white or red LED accents, or square with white LED accents. Every style uses white LED halos, with drivers included.
Plain Shroud Options
Prefer a cleaner look? Choose a plain chrome or black shroud, or run the projectors on their own.
Shroud Sizes
Halo shrouds range from about 92mm to 125mm across depending on the style. Check the photo for your chosen style against the space in your headlight.
CE Certified
Meets CE certification standards for quality and safety.
Sold as a Pair
Two projectors with control units and mounting hardware — enough for one set of headlights.
1-Year Warranty
Backed by Sinolyn for reliable, long-term performance.
Technical Specifications
- Brand: Sinolyn
- Model: 2.5" Tri-Colour Bi-LED Projector
- Beam Cut-off: Right-hand drive (RHD), for NZ roads
- Lens Size: 2.5"
- Colour Temperature: 3000K / 4300K / 6000K (switchable)
- Power: 30W low beam / 37W high beam (per projector)
- Input Voltage: 12–16V DC
- LED Chips: 6 per projector
- Control: Bluetooth smartphone app
- Cooling: Fan with aluminium housing
- Fitment: H4, H7, 9005 and 9006 headlights, or as a replacement for existing 2.5" projectors
- Dimensions: 82mm wide, 137mm deep
- Shroud Options: Chrome, black, or 7 halo shroud styles (white LED halos)
- Certification: CE
- Warranty: 1 year
- Quantity: 2× projectors + control units and mounting hardware (+2× shrouds and drivers if selected)
Warranty
Warranty: 1 year, backed by Sinolyn.
If something goes wrong, email support@enlightworks.co.nz with your order number, a short description of the fault, and photos or a video, and we'll work through the claim with you.
Most claims can be sorted from photos or video, so you usually won't need to send the item back. Where the fault is clear, we'll send a replacement at no cost, or refund you if a replacement isn't practical.
Your rights under the Consumer Guarantees Act 1993 are not affected.
Shipping Policy
Shipping is free on all New Zealand orders, with no minimum spend.
We don't hold stock locally. Your order is dispatched directly from our supplier, which is how we bring in hard-to-find parts at fair prices.
Orders are processed within 1 to 3 working days, and most arrive within 2 to 3 weeks of ordering. If your order includes items from different suppliers, they'll arrive in separate parcels.
You'll get a tracking number by email as soon as your order ships, and you can follow it on our Track Your Order page.
We currently ship within New Zealand only. Read our full shipping policy
Exchanges and Returns
We don't accept returns or exchanges for change of mind, so please check sizing and fitment before you order. If you're not sure what suits your car, get in touch first and we'll help.
If your item arrives faulty, damaged or not as described, email support@enlightworks.co.nz within 30 days of receiving it, with your order number, a description of the issue, and photos or a video.
Most of our products ship from overseas suppliers, so we usually won't need the item sent back. Depending on the issue, we'll send a replacement at no cost, arrange a repair, or refund you. Please don't send anything back without contacting us first.
Approved refunds go back to your original payment method within 14 business days. Your rights under the Consumer Guarantees Act 1993 and the Fair Trading Act 1986 are not affected. Read our full return and refund policy
Share
