RGB Panoramic Sunroof Ambient Light Kit

Frame your panoramic sunroof in colour with this RGB ambient light kit. Two slim 110cm acrylic light strips run along the edges of the sunroof opening and light up with flowing, multi-colour effects, giving a glass roof the same premium cabin glow a starlight headliner gives a solid one.

Colour, brightness and effects are all set from the Bluetooth app, with flowing streamer patterns, solid colours, breathing, gradient, strobe and music modes. Choose the hardwired version for a clean, permanent install, or the 12V socket plug or USB version for simple plug-in power. The strips can be trimmed to suit smaller openings, and the kit suits most cars, SUVs and vans with a panoramic or large sunroof as a DIY install.

Features & Benefits

• Made for Panoramic Sunroofs: Two 110cm strips frame the sunroof opening, ideal for glass-roof cars where a starlight headliner isn't an option
• Flowing Colour Effects: Multi-colour streamer patterns travel along the strips, or set a single solid colour
• Bluetooth App Control: Adjust colour, brightness, speed and effects from your phone (Android / iOS)
• Multiple Modes: Solid colour, breathing, gradient, strobe and music modes
• Slim Acrylic Strips: Low-profile strips that tuck neatly into the trim around the sunroof opening
• Trim to Fit: The strips can be cut down to suit smaller sunroof openings
• Three Power Options: Hardwired, 12V socket plug or USB

Technical Specifications

• Light Source: RGB LED, flowing multi-colour (symphony)
• Strip Material: Acrylic
• Strips: 2× 110cm, trimmable
• Colours: 256-colour palette in the app
• Control: Bluetooth app (Android / iOS)
• Power: 12V hardwired, 12V socket plug or USB, depending on the option chosen
• Fitment: Universal, for panoramic and large sunroof openings

Power Options

• Hardwired: Wires into the car's 12V supply for a clean, permanent install, with a main controller, a power lead with an inline touch button and two extension leads
• 12V Socket Plug: Plugs into a 12V accessory socket, with a compact control box and plug-in power lead
• USB: Plugs into a USB port, with a compact control box and USB power lead

Installation Tips

• Check the Gap: Make sure there's a small gap between the sunroof opening and the headliner trim to tuck the strips into
• Test First: Connect everything and test it with the app before fitting
• Plan the Route: Lay the strips along each side of the opening and plan where the controller and cables will hide behind the headliner or pillar trims
• Fit: Ease the strips into the trim gap with a plastic pry tool, trimming the ends if needed
• Hardwired Version: Connect to a fused, switched 12V supply so the lights turn off with the car

What's in the Box

• 2× 110cm RGB acrylic light strips
• Hardwired: 1× main controller, 1× power lead with touch button, 2× extension leads
• 12V Socket Plug: 1× control box, 1× 12V socket power lead, pry tool and double-sided tape
• USB: 1× control box, 1× USB power lead, pry tool and double-sided tape

Pairs Well With: our Trim Removal Tool Kit, for easing trim panels off without scratching them.

DIY installation. Fitting is easiest on sunroofs with a trim gap around the opening. EnlightWorks does not provide installation services for interior ambient lighting. The kit is supplied for customer or installer fitting.