Carbon Fibre Vinyl Wrap (Self-Adhesive)

Add a carbon fibre look to your cabin with this self-adhesive vinyl wrap. The PVC film has a peel-and-stick backing with air-release channels, so it goes on smooth and bubble-free over consoles, dash trims, door cards, mirror caps and other smooth trim pieces for a clean, custom finish.

Choose from seven black patterns, from classic 3D, 6D and 9D carbon weaves to forged carbon, honeycomb and ghost finishes, in five sizes from 10 x 150cm for small trims up to 50 x 200cm for larger panels. It cuts easily to shape, softens with a little heat to follow curves, and pairs perfectly with our suede wraps, ambient lighting and starlight headliner kits. Universal fit for most cars as a DIY interior upgrade.

Features & Benefits

• Self-Adhesive Backing: Peel off the backing paper and press into place, with no separate glue needed
• Air-Release Channels: Lets trapped air escape as you apply it, for a smooth, bubble-free finish
• Heat-Formable Film: Warm it with a heat gun to soften the vinyl and wrap it around curves and edges
• 7 Black Patterns: Forged carbon, honeycomb, ghost and 3D, 6D and 9D carbon weaves to suit any build
• Waterproof PVC Vinyl: 0.15mm film that stands up to cleaning and moisture
• Cut to Any Shape: Trim with a sharp blade or scissors to suit consoles, dash trims, door cards and mirror caps
• Five Sheet Sizes: 10 x 150cm for small trims up to 50 x 200cm for larger panels or several pieces
• Interior or Exterior: Also suits mirror caps, door handles, pillars and motorcycle panels

Technical Specifications

• Product Type: Self-adhesive carbon fibre vinyl wrap
• Material: PVC vinyl film
• Thickness: 0.15mm
• Backing: Self-adhesive, with air-release channels and peel-off backing paper
• Sheet Size: 10 x 150cm, 20 x 150cm, 30 x 150cm, 50 x 150cm or 50 x 200cm
• Patterns: Carbon Black, GW-Black, Ghost Black, XG-Black, 3D Carbon, 6D Carbon, 9D Carbon
• Applications: Consoles, dash and door trims, mirror caps, door handles, pillars and motorcycle panels
• Fitment: Universal — cut to suit most vehicles

Pattern Guide

• Carbon Black: Forged carbon look with fine, marbled flakes
• GW-Black: Black honeycomb (hexagon) pattern
• Ghost Black: Subtle marbled "ghost" pattern that shows up in the light
• XG-Black: Forged carbon look with larger flakes and a matte finish
• 3D Carbon: Textured carbon weave with a matte finish
• 6D Carbon: Glossy carbon weave
• 9D Carbon: High-gloss carbon weave with a deep, realistic look

Installation Tips

• Prep: Clean the surface with water and let it dry fully, so it's smooth and free of dust and grease
• Cut: Cut each piece slightly oversize, leaving extra to wrap around the edges
• Apply: Peel back the backing paper and smooth the film down with a soft squeegee to push out any air
• Curves: Warm the film gently with a heat gun to stretch it around curves and edges, then trim the excess
• Aftercare: Keep it out of strong sunlight for 24 hours and don't wash the car for 48 hours after fitting
• Smooth Surfaces Only: Not suitable for textured surfaces such as leather, frosted or brushed finishes
• Safety: Don't cover airbag covers or airbag deployment seams

What's in the Box

• 1× Self-adhesive carbon fibre vinyl sheet in your chosen pattern and size

DIY installation. We recommend testing a small piece on a hidden area first. Colours and finishes can look slightly different on screen than in person. The squeegee shown in some photos is a supplier bonus and isn't guaranteed. EnlightWorks does not provide installation services for interior wraps — the material is supplied for customer or installer fitting.